The floor was cleaned, sanded and provided with a coat of SolidLux Screed, mixed with SolidLux Adhesive. For robust coat thickness and good adhesion two coats of SolidLux Basecoat were applied before the final SolidLux Topcoat. After each coat a portable lamp was used to cure the coated surface instantly by UV light.
Project:
Floor maintenance in cold store.
Existing floor:
monolithic-finished concrete floor with a worn, solvent-free epoxy coating.
The cold store is used daily by forklifts. Due to a porous substrate the original epoxy floor coating shows signs of poor curing and is damaged. Evacuating the cold store is not an option: the cool temperature must be maintained, and work must continue.
“The work never stopped. Just a short wait when the UV light went round and the pallet truck could drive on the floor again.”